Fusion 360 Milling Post Processor for Centroid

General Milling Post Processor for Centroid with additional Features

Project maintained by swissi2000 Hosted on GitHub Pages — Theme by mattgraham

Safe Retract Position

This Property allows to specify the Retract Position of the Z Axis.

Possible options are:

The default value is G28. If Clearance Height is selected, the Z-Axis will retract to the Clearance Height set in Fusion 360.

The coordinates of the G28 and G30 commands can be configured in CNC12 under Setup[F1]->Part[F1]->WCS Table[F9]->Return[F1]

The default values in CNC12 for G28 and G30 for all axis is 0, so by default the Z Axis will retract to the machines Z0 Position..

Choose one of the available Return-Options and modify the return coordinates in CNC12 as required.

Note that the retract position of the Z Axis at the end of the job can be configured seperately with Z-Position at End of Job