Fusion 360 Milling Post Processor for Centroid

General Milling Post Processor for Centroid with additional Features

Project maintained by swissi2000 Hosted on GitHub Pages — Theme by mattgraham

Z-Position at End of Job

This Property allows to modify the Z-Axis return position at the end of a job.

Possible options are:

The default value is G28. Selecting No Move can be dangerous and is not recommended. Use it at your own risk!

The coordinates of the G28 and G30 commands can be configured in CNC12 under Setup[F1]->Part[F1]->WCS Table[F9]->Return[F1]

The default values in CNC12 for G28 and G30 for all axis is 0, so by default the machine will return to the Z0 position at the end of the job.

Choose one of the available Return-Options and modify the return coordinates in CNC12 as required.