Fusion 360 Milling Post Processor for Centroid

General Milling Post Processor for Centroid with additional Features


Project maintained by swissi2000 Hosted on GitHub Pages — Theme by mattgraham

#325 Z Clearance Height

Description

Variable #325 holds the Z Clearance Height of the current Tool Path. This can be used to verify if enough clearnce height has been configured zu clear any clamping tools. It’s also valuable in combination with the Property: Check Tool Offset to verify if the tool tip has the correct distance to the Origin Point of the workpiece after a Tool Height Offset has been made.

This is an example of a #326 information string:

#325 = "50"   ; Z Clearance Height

Information Source

The Z Clearance Height is taken from the Heights Tab of the Tool Path:

[Use Browser Back Button to Return]