Fusion 360 Milling Post Processor for Centroid
General Milling Post Processor for Centroid with additional Features
Project maintained by swissi2000 Hosted on GitHub Pages — Theme by mattgraham
Enable Clamp M10/M11
Description
This Property allows to enable the Clamp commands M10/M11 of a rotary table and is being used in combination with the Property: Rotary Table Axis.
Implementation Details
If this Property is activated, the Post Processor will add a M11 Clamp-Off command before an axis rotation move and a M10 Clamp-On command after the move has finished. The job file will look like this:
.
N45 M11
N50 G0 A0.
N55 M10
.