Fusion 360 Milling Post Processor for Centroid

General Milling Post Processor for Centroid with additional Features

---

Project maintained by swissi2000 Hosted on GitHub Pages — Theme by mattgraham

#324 Origin Point

Description

Variable #324 shows the stock coordinates in the plus and negative directions of the X, Y and Z Axis from the defined Origin Point and looks like this:

 #324 = "Stock Coord = Dir+(X70. Y54.5 Z0.) Dir-(X-70. Y-54.5 Z-12.)"   ; Origin Position

Based on the coordinates listed in the example above, the Origin Point (Part 0) is in the stock center of the X & Y Axis and on top of the stock in the Z Axis:

[Use Browser Back Button to Return]