Fusion 360 Milling Post Processor for Centroid

General Milling Post Processor for Centroid with additional Features

---

Project maintained by swissi2000 Hosted on GitHub Pages — Theme by mattgraham

#315 Spindle Speed

#316 Spindle Direction CW or CCW

#317 Optimal Load (WOC)

#318 Maximum Step Down (DOC)

#319 Feed Rate

#320 Feed per Tooth

#321 Ramp Feed Rate

#322 Plunge Feed Rate

#323 Feed per Revolution

Description

The default values for Feed & Speed are coming from the Fusion 360 Tool Library but they can be adjusted when setting up the actual tool path of the operation.

These are examples of the #315 - #323 information strings:

#315 = "6000"     ; Spindle Speed
#316 = "CW"       ; Spindle Direction
#317 = "1"        ; Tool Optimal Load (WOC)
#318 = "6"        ; Max Stepdown (DOC)
#319 = "375"      ; Feed Rate
#320 = "0.0208"   ; Feed per Tooth
#321 = "1920"     ; Ramp Feed Rate
#322 = "30"       ; Plunge Feed Rate
#323 = "0.005"    ; Feed per Revolution

Information Source

Default Feed & Speed parameters for each tool are configured in the Fusion 360 Tool Library:

When setting up the actual Tool Path in Fusion 360, all the Feed & Speed parameters are getting populated into the Feed & Speed Tab of the Tool Path and can be adjusted as needed:

The values in the variables #315 - #323 are from the final settings that have been configured in the actual Tool Path.

[Use Browser Back Button to Return]